【计算机论文全套栏目提醒】:网学会员在计算机论文全套频道为大家收集整理了“毕业设计(论文)-驱动桥锁片冲压模具设计【全套图纸】 - 毕业设计“提供大家参考,希望对大家有所帮助!
优秀全套设计专业提供 南 京 工 程 学 院毕业设计说明书论文 全套图纸,加 153893706 作 者: 学 号 学 院: 专 业: 数控加工与模具设计 题 目: 驱动桥锁片冲压模具设计指导者:评阅者: 2012 年 4 月 淮 安 毕业设计说明书(论文)中文摘要 随着生产现代化程度的不断提高,人 们对汽车的消费不断增 加 ,市场对驱动桥的需求也越来越大,驱 动桥产品的市场前景 十分广阔。
随着国内企业市场意识逐步增强,行业竞争 力将不断加剧。
因此 ,一种安全 、低成本、使用寿命长的驱动桥锁片生产技 术已越来越迫切。
本文对驱动桥锁片的冲压模具进 行了设计,对冲压件的 工艺进行 了设计和计算。
对模具的零 件进行了设计 ,给出了零件图和 模具装配图 ,最后,对模具主要零件的加工工艺进行了 分析。
该零件采用复 合模进行加 工,只需一副模具,冲压件的形状精度和尺 寸精度容易保证,生产 效率高。
此模具不采用侧压装置,为了补偿因进料过 程中条料摆动而导致 的侧面搭边 值的减小,条料宽度应增加一个摆动量。
本方案设计简单,结构紧凑,减 少了产品制造工序, 提高了零件 精度。
关键词 驱动桥锁片 复合模 冲压件 摆动量 毕业设计说明书(论文)外文摘要Title Stamping Mould Design of Driving Axle LockAbstractWith the continuous improvement of modern production theconsumption amount of the car is continuously increasing and themarket demand is also growing on the drive axle the market prospectof drive axle products is very broad. With the market awareness ofdomestic enterprises gradually increases the competitiveness of theindustry is growing. Therefore a safe low-cost long using lifedrive axle lock production technology has become increasinglyurgent.Stamping die of the driving axle lock is designed in this paperstamping process of this part is designed and calculated. The partsof the mold is designed at the same time the parts drawing and moldassembly drawing are drawn at last the main parts processingtechnology of the mold is analyzed. The part is processed by compoundmodulus just one mold the shape and dimensional accuracy are easyto ensure the production efficiency of the mould is high. This moldThe side pressure device is not necessary in this mould in orderto compensate for side cutting-building side value of the feedingprocess due to the strip swing the strip width should be increasedby a swing unit.The design of this mould is simple and the structure is very compactthe product manufacturing process is reduced in this paper theaccuracy of parts is improved greatly.Keywords Driving axle lock Compound mould Stamping partSwing unit 第 II 页 南京工程学院毕业设计说明书(论文) 目 录前 言 .................................................. 1第一章 绪论 ............................................ 2 1.1 产品介绍 2 1.2 课题介绍 3第二章 工艺设计 ........................................ 4 2.1 零件的尺寸精度 4 2.2 零件结构工艺分析 4 2.3 冲压件的材料 4 2.4 确定冲压工艺方案 4第三章 工艺计算 ........................................ 6 3.1 排样图设计 6 3.1.1 排样的意义和材料利用率 ............................... 6 3.1.2 排样图确定 ........................................... 7 3.2 刃口尺寸计算 8 3.3 工艺力的计算 10 3.3.1 计算总压力 .......................................... 10 3.3.2 确定压力中心 ........................................ 11 3.3.3 压力机的选择 .