测量结果进行比较,进行统计学分析,探讨运用曲面断层 X 线系统和牙科 CT 系统测量正常人牙齿外部形态数据的可行性。
-2- 第四军医大学硕士学位论文研究方法: 1、制取 10 名正常成人男性 6 例、女性 4 例,年龄 24-27 岁的上下颌全牙列石膏模型,用电子数显游标卡尺测量石膏模型牙冠的宽度及厚度,测量两次每次相隔两周;应用 SPSS 统计软件对两次所测数据进行配对 T检验,评估实验者使用游标卡尺对石膏模型重复测量的信度。
2、制作带有小钢球的牙合垫,志愿者佩戴牙合垫后进行曲面断层 X 线片扫描,将扫描图像导入软件,在换算失真率的基础上进行牙冠宽度及牙齿长度的测量,测量两次每次相隔两周;应用 SPSS 统计软件对两次测量的数据进行配对 T 检验,评估实验者测量的信度;取两次牙冠宽度测量的平均值,与石膏模型两次测量牙冠宽度的平均值进行配对 T 检验,检验曲面断层系统所测数据的效度。
3、对志愿者进行牙科 CT 扫描,将扫描图像导入软件,在计算机上对牙冠宽度、厚度及牙齿长度进行测量,测量两次,每次相隔两周;应用 SPSS统计软件对两次测量的数据进行配对 T 检验,评估实验者测量的信度;取两次测量牙冠宽度及厚度的平均值,与石膏模型两次测量牙冠宽度及厚度的平均值进行配对 T 检验,检验牙科 CT 系统所测数据的效度。
研究结果: 1、石膏模型对牙冠宽度及厚度两次测量的结果显示,上颌牙冠宽度的P 值在 0.11 至 0.91 之间,上颌牙冠厚度的 P 值在 0.09 至 0.78 之间;下颌牙冠宽度的 P 值在 0.29 至 0.83 之间,下颌牙冠厚度的 P 值在 0.12 至 0.76 之间。
P 值均大于 0.05,表明该测量结果具有较好的可重复性,实验者可以在不同的时间段对同一标志点进行准确的辨认与测量。
-3- 第四军医大学硕士学位论文 2、曲面断层 X 线系统对牙冠宽度及牙齿长度进行两次测量的结果显示,上颌牙冠宽度的 P 值在 0.11 至 0.78 之间,上颌牙齿长度的 P 值在 0.11至 1.00 之间;下颌牙冠宽度的 P 值在 0.22 至 0.89 之间,下颌牙齿长度的 P值在 0.23 至 0.89 之间。
P 值均大于 0.05,表明该测量结果具有很好的可重复性,实验者可以在不同的时间段对同一标志点进行准确的辨认与测量。
曲面断层 X 线系统与石膏模型对牙冠宽度两次测量结果的平均值进行比较结果显示,上颌牙冠宽度的 P 值在 0.00 至 0.89 之间,下颌牙冠宽度的P 值在 0.00 至 0.79 之间。
在这个范围内其中有十六组数据 P 值是大于 0.05,表明无统计学差异;而另外十二组数据 P 值小于 0.05,表明有统计学差异。
同时,通过表中数据可以发现后牙的 P 值结果大部分都显示出有统计学差异,而前牙和前磨牙的 P 值结果较后牙稳定一些。
3、牙科 CT 系统对牙冠宽度、厚度及牙齿长度两次测量的结果显示,上颌牙冠宽度的 P 值在 0.07 至 0.97 之间,上颌牙冠厚度的 P 值在 0.07 至0.83 之间,上颌牙齿长度的 P 值在 0.06 至 0.98 之间;下颌牙冠宽度的 P 值在 0.08 至 0.97 之间,下颌牙冠厚度的 P 值在 0.08 至 0.87 之间,下颌牙齿长度的 P 值在 0.07 至 0.98 之间。
P 值均大于 0.05,表明该测量结果具有很好的可重复性,实验者可以在不同的时间段对同一标志点进行准确的辨认与测量。
牙科 CT 系统与石膏模型对牙冠宽度及厚度两次测量结果的平均值进行比较结果显示,上颌牙冠宽度的 P 值在 0.06 至 0.91 之间,上颌牙冠厚度的 P 值在 0.14 至 0.71 之间;下颌牙冠宽度的 P 值在 0.09 至 0.89 之间,下颌牙冠厚度的 P 值在 0.07 至 0.98 之间。
P 值均大于 0.05,表明两种方法对牙冠宽度及厚度的测量结果无统计学差异。
研究结论: 1、本实验三种测量牙齿外部形态的方法均表现出较好的稳定性和可重 -4- 第四军医大学硕士学位论文复性; 2、在使用小钢珠投照进行失真率的矫正后,曲面断层 X 线系统仍然与石膏模型测量的结果存在一定的差异,故该系统不适于活体全牙列牙齿外部形态数据的精确定量分析测量; 3、牙科 CT 系统测量牙齿外部形态数据稳定、可靠,可用于测量活体全牙列牙齿外部形态数据。
关键词:牙科 CT;曲面断层 X 线;游标卡尺;石膏模型 -5- 第四军医大学硕士学位论文 A feasible study on measuring normal teeth morphology data by Panoramic Radiography X-ray and Cone Beam CT Candidate for master: Gao Hui Supervisor: Professor Zhang Shaofeng Department of Prosthodontics School of Stomatology Fourth Military Medical University Xi’an 710032 China Abstract To form the whole dentition digital model and establish a normal teethmorphology database will give a great impetus to dental clinical practicescientific research and teaching. The use of imageology methods instead oftraditional manual methods to measure normal teeth morphology data hasbecome a trend. The imageology methods can be used to measure the humanwhole dentition in vivo. With the development of imageology andcomputer-aided design these methods are greatly improved for instance somecan provide the thickness of tooth enamel and clear marrow morphology imagessome can reconstruct the whole dentition three-dimensional morphology byusing special software and so on. All these methods have greatly improved theaccuracy of the data measurements. -6- 第四军医大学硕士学位论文Objective: The purpose of this study was to investigate the feasibility of measuringnormal teeth morphology data by Panoramic Radiography X-ray and ConeBeam CT CBCT system.Methods: 1. The whole dentition plaster casts of the 10 normal adults 6 males 4females aged from 24 to 27 were prepared then the dental crown widths anddental crown thicknesses were measured by vernier caliper. The measurementswere taken twice at an interval of two weeks. These data were analyzed byPaired T-test in the SPSS software package in order to evaluate the accuracy andrepeatability of the measurements. 2. To prepare jaw pads in which metal balls with standard size wereembedded. The volunteers were asked to put these jaw pads into their mouthsand their whole dentition were scanned by Panoramic Radiography X-ray. Theimages’ distortions were corrected according to the change of diameter of themetal balls in the software. Then the dental crown width and tooth length weremeasured. The measurements were taken twice at an interval of two weeks.These data together with the data taken by vernier caliper were analyzed byPaired T-test in the SPSS software package in order to evaluate the repeatabilityand accuracy of the measurements take by Panoramic Radiography. 3. The whole dentition of the volunteers were scanned by CBCT then thedental crown width dental crown thicknesses and tooth length were measuredby the CBCT official authorized software. The measurements were taken twiceat an interval of two weeks. These data together with the
上一篇:
全数字B型超声诊断仪的测量与报告模块设计
下一篇:
视频在线点播系统:ASP.NET 和 SQL Server 2005 实现一个简易的在线视频点播系统。按功能的不同可以划分为 5 个模块