【计算机论文全套栏目提醒】:本文主要为网学会员提供“毕业设计论文-薄板定尺机构的设计(全套图纸) - 毕业设计”,希望对需要毕业设计论文-薄板定尺机构的设计(全套图纸) - 毕业设计网友有所帮助,学习一下!
11完整论文 武汉工业学院 毕业设计论文全套 CAD 图纸,联系 153893706 课 题:薄 板 定 尺 机 构 的 设 计 作 者: 指导老师: 专 业: 包 装 工 程 时 间: 2011 年 06 月 内容摘要 武钢辉宝材料有限公司是国内武钢辉宝第一家大规模连续生产冷轧卷带金属复合材料的工厂,其剪切生产线设备主要由开卷机、校平机、纵剪机、活套坑、张力机构、剪板机等设备组成。
在开卷校平剪切生产线上,定尺机构精确送出冷板的设定剪切长度是设计定尺机构的核心工作,也是衡量开卷校平剪切生产线设备技术性能的重要指标。
本设计的任务是根据所提供的参数,并结合生产现场的实际情况,设计出一套经济实用的定尺机构。
要求: 1.机构传动平稳,送料准确。
2.冷板与送料辊之间不能产生相对移动。
关键词: 冷板剪切线、开卷机、校平机、剪板机、定尺机构 Abstract The WuHan steel material co. ltd is the first domestic factory which has a large-scaleto produce the cold roll matel continuesly. The shear to slice Production line is made of theopenning machine down cutting machine school shears machine pit machine tensionorganization machine trigger machine etc.At the opening shear and trigger producedline the fix ruler machine precisicely give the length of cold plankwhich is the core taskof design the fix ruler machine and is also the important guideline to weigh the techniquecapability of the opening shear trigger produced line equipment. The assignment of the design is through the provided parameterand combine with thepractice complexion of manufactured spot to work out a suit of the fix rulermachine which is cheap and applied. Required.: 1. The machine drives placiditily and delivers material precisely. 2. Between the cold plank and the deliver roller there is no relative motion.Key words: the tangent of the cold plank shears the openning machinethe shearingmachine the trigger fix ruler machine 目 录第一章 前言 5第二章 开卷校平生产线的概述 82.1 国内金属卷板剪切生产线发展现状 82.2 开卷校平生产线的组成和工作原理 92.2.1 开卷校平剪切生产线的设备组成 92.2.2 薄板定尺机构的工作原理 102.3 薄板定尺机构的设计任务 102.3.1 课题背景 112.3.2 设计参数 112.3.3 设计任务 11第三章 薄板定尺机构的设计及计算 123.1 轴的设计 123.1.1 主轴的受力分析 123.1.2 最小轴径的设计计算 123.1.3 轴的校核 143.2 横梁和立柱部件 143.3 气缸的选择 153.4 齿轮齿条的设计 16第四章 标准件的选择和校核 214.1 轴承的选择和校核 214.1.1 轴承类型的选择和尺寸 214.1.2 校核轴承的寿命 214.2 弹簧的选择 224.3 标准联接件 234.3.1 螺栓联接 234.3.2 螺钉联接 234.3.3 紧定螺钉联接 23第五章 总结 24附:主要参考文献 25 第一章 前 言 在设计之前,我想对国内外机械制造的现状做个粗略介绍。
世界范围内,韩国已制定机械工业十大发展计划,包括:机械园区、尖端生产系统、设计技术、研究技术革新中心、高速/智能加工、机械零件设计、纺织机械研究、模具技术综合支援中心、电子商务系统等。
预期到 2010 年韩国机械产业的自给率达到 80,2005 年则定为机械工业贸易平衡的第一年。
美国企业通过网络企业对企业(B2B)的服务有效整合供应商与客户的采购和存货系统;大型汽车公司(通用、福特、戴姆勒/克莱斯勒)和航天航空公司(波音、洛克希德)都通过 B2B 在全球范围内与相关体系同步设计开发。
机床业的制程管理、远端监控、故障排除和售后服务日渐普及。
日本机械工业协会已制定 2010 至 2025 年机床 技术革新战略,重点在强调网络连接加工型态、信息